Circuit Switched Networks

Here are some quick facts lifted from a CCNA online quiz

Three accurate descriptions of Circuit Switched Networks
* With circuit switching a dedicated physical circuit is established, maintained and terminated through a carrier network for each communication session
* Circuit switching allows multiple sites to connect to the switched network of a carrier and communicate with each other
* ISDN is a circuit switched network

Three statements for PSTN
* Other than a modem, no additional equipment is required
* Relatively lost cost associated with the implementation of a PSTN connection link
* The maintenance of a public telephone network is very high quality with a few instances in which lines are not available

Three statements describe PPP
* A point to point (or serial) comms link provides a single preestablished WAN communications path from the customer premises through the carrier network ie telephone company to a remote network
* Carriers lease point to point lines usually, so they're often called leased lines
* For a point to point line, the carrier dedicates fixed transport capacity and facility hardware to the line of a customer

Three statements describe WAN bandwidth
* North American standard to describe bandwidth in DS numbers (DS0, DS1...) that refers to the rate and format of the signal
* Bandwidth on a serial connection can be incrementally increased to accommodate the need for faster transmission
* Bandwidth refers to the rate at which data is transferred over the comms link

HDLC
* Includes support for both PPP and multipoint configurations
* Cisco HDLC there is no windowing or flow control
* HDLC specifies an encapsulation method for data on synchronous serial data links using frame character and checksum

Function of PPP
* twist: Authentication phase of PPP session is not necessarily required
* PPP originally emerged as an encapsulation protocol for transporting IP traffic over PPP links
* PPP provides router to router and host to network connections over synchronous and asynchronous circuits
* The LCP in PPP is used for establishment, configuration and testing the data-link connection

Considerations for PPP
* PPP links require minimal expertise to install and maintain
* usually offer a high quality of service
* provide permanent dedicated capacity that is always available